Destruction of EDTA using Ce(IV) mediated electrochemical oxidation: a simple modeling study and experimental verification

Mediated electrochemical oxidation (MEO) is a recent development in the environmental research field for the complete destruction of organic pollutants. This study presents the destruction of EDTA by cerium(IV) MEO process in nitric acid medium. The destruction reaction was carried out in a continuous stirred tank reactor under various conditions. A simple kinetic model was developed to analyze and simulate the organic destruction in the MEO process. The model was based on the calculation of the total mass balance, the component mass balance, and the energy balance in the reactor and also in the heating jacket. The sensitivity to key operating conditions such as the initial EDTA concentration (50-200 mM), EDTA feeding time (30-180 min), reaction temperature (323-363 K), and the rate laws corresponding to zero-, first-, second-, and third-order reaction were analyzed. It was found that the model simulated agreed well with the experimental data for EDTA oxidation. The results obtained showed the suitability of the MEO process for the effective mineralization of high concentrations of EDTA.     

Influence of Motivations for Seeking ISO 14001 Certification on Perceptions of EMS Effectiveness in China

This study examines the motivations of mainland Chinese facilities in seeking ISO 14001 certification and examines the linkages between these motivations and self-reports of the effectiveness of major environmental management system (EMS) components. In a sample of 128 facilities in Beijing, Shanghai, and Guangzhou, the main drivers for certification were reported to be to ensure regulatory compliance, to enhance the firms reputation, and to improve environmental performance, in that order. Although motivation to achieve cost reductions were least emphasized, a broad range of motivations appears to be considered in the decision to seek certification to ISO 14001. Regression models linking these motivations to the EMS components suggests that internal motivations have an influence on most EMS components. One interesting exception to this, however, is that no significant relationship was observed between internal motivations and the promulgation of environmental objectives and targets. The relationships associated with external motivations for certification (i.e., those in response to customer and other stakeholder pressures) and EMS components, on the other hand, are weaker and tend to occur earlier in the process cycle. No significant relationships were found between motivations to reduce costs and perceptions of the effectiveness of EMS components. Overall, these findings suggest that ISO 14001, as currently being implemented in mainland China, may have a modestly useful role when used in combination with other policy mechanisms to move the Chinese economy toward more sustainable practices. It is asserted that the ISO standard could provide even greater benefits if Chinese registrars were more proactive in developing EMS in conjunction with even more rigorous third-party audits.Published online     

Asbestos exposure among Seoul metropolitan subway workers during renovation of subway air-conditioning systems

Air quality in underground spaces has seldom been evaluated in Korea. Accordingly, the current study recently evaluated asbestos exposure among Seoul metropolitan subway workers during the renovation of the subway's air-conditioning system. To identify possible routes of asbestos exposure, suspected sources, including gaskets, ceiling boards, ceiling materials, and dust settled inside ducts, were all sampled. Personal air samples were also taken to evaluate any asbestos exposure during the renovation. The asbestos fibers found in the samples were analyzed using a transmission electron microscope (TEM) equipped with an energy dispersive X-ray analyzer (EDX). Twelve out of eighteen bulk samples contained asbestos, the majority of which was chrysotile fibers. Asbestos was detected in 9 out of 72 personal air samples and the level ranged from 0.003 to 0.02 fibers/cm(3). While asbestos levels were below Korean occupational limit of 2 fibers/cm(3), they were still detectable and therefore further monitoring would be appropriate.     

Electron affinity coefficients of nitrogen oxides and biodegradation kinetics in denitrification of contaminated stream water

During the dry season in Korea, rivers become more vulnerable to contamination by biochemical oxygen demand (BOD) and nitrogen. It is hypothesized that the natural characteristics of the streams in Korea allow the contaminated water to be treated at the tributaries. Down-stream river water quality in Korea may be improved by spraying the contaminated stream water from the tributaries over the surrounding floodplains. The consequent water filtration through the soil could remove the contaminants through aerobic and denitrifying reactions. In this study, the kinetics parameters of the denitrifying reaction in floodplain filtration were determined using contaminated stream water. For the electron donor the Monod kinetics was used, while the competitive Michaelis-Menten model was employed for the electron acceptors. The parameters to the competitive Michaelis-Menten model were found using continuous denitrifying reactions, instead of the batch reactions employed in previous studies, to match the conditions needed to apply the competitive Michaelis-Menten kinetics. From the result, it was found that continuous reactions as well as batch reactions could be used to determine the affinity coefficients in denitrification. The results of this study also showed that the affinity coefficient of NO2, using continuous reactions, was similar to that of other studies in the literature found via batch reactions, whereas the affinity coefficient of N2O was much larger than that acquired with batch reactions. The parameters obtained in this study will be used in future work to simulate the contaminant behaviors during floodplain filtration using a mathematical model.     

Atmospheric Loadings,Concentrations and Visibility Associated with Sandstorms: Satellite and Meteorological Analysis

This Korea-China study monitored the phenomena of sandstorms and significant dustfall (SD) from 1997 to 2000. The analysis of our data included ground measurements of dust concentration, visibility, satellite imagery, aircraft and lidar observations. In addition, an estimation of atmospheric loadings and a studyon the relationship between dust concentrations and visibilitywere carried out. The movement and invasion of dust clouds toKorea were clearly identified with meteorological and satellitedata. The increasing concentrations of TSP and PM₁₀ concurredwell with the satellite information. From case studies, weestimated that atmospheric loadings of a dust cloud were over 1million ton and that the deposition over the Korean Peninsulawas in the range from 46 000 to 86 000 tons. For SD withvisibility of 3 km, we predict TSP 659 g m^-3 and PM₁₀ 493 g m^-3. We recommend the issuance of an SD Watch(advisory) and an SD Warning for the general public.     

Atmospheric lead concentration distribution in Northern Taiwan

Atmospheric lead concentrations were measured randomly, approximately once per week, at five traffic sites in northern Taiwan from September 1994 to May 1995. Three types of theoretical distributions, lognormal, Weibull and gamma were selected to fit the frequency distribution of the measured lead concentration. Four goodness-of-fit criteria were used to judge which theoretical distribution is the most appropriate to represent the frequency distributions of atmospheric lead.The results show that atmospheric lead concentrations in total suspended particulates fit the lognormal distribution reasonably well in northern Taiwan. The intervals of fitted theoretical cumulative frequency distributions (CFDs) can successfully contain the measured data when the population mean is estimated with a 95% confidence interval. In addition, atmospheric lead concentration exceeding a critical concentration is also predicted from the fitted theoretical CFDs.     

Dietary exposure to DDT of secondary school students in Hong Kong

The aim of this study was to determine the dietary exposure of DDT in foodstuffs consumed in Hong Kong by secondary school students in Hong Kong in 2005. Food samples of domestic or imported food were collected randomly from local markets for the determination of DDT. The analytical method for this survey was based on isotope dilution technique. DDT isomers were determined at parts per billion (mugkg(-1)) levels in foods by pressured fluid extraction followed by gel permeation column cleanup and gas chromatography with mass spectrometry detection. Among the 98 composite samples, 25 were found positive with DDT levels greater than the limit of quantitation (LOQ) (1mugkg(-1) for each isomer of DDT). Only two of the meat products were found to contain low levels of the metabolites of DDT. A number of fish and shellfish were found to contain not just the metabolites of DDT, but also parent DDT. The main contribution to DDT was from seafood. The dietary intake of DDT for an average and high secondary school student consumers were estimated to be 0.145 and 0.291mugkg(-1)bwd(-1), respectively. Both levels fell well below the Provisional Tolerable Daily Intake (PTDI) of 10mugkg(-1)bwd(-1) established by the Joint Food Agriculture Organization/World Health Organization Meeting on Pesticide Residues (JMPR). It was concluded that both the average and high secondary school student consumers were unlikely to experience major toxicological effects of DDT.     

Potential source of asbestos in non-asbestos textile manufacturing company

Recently, a worker with lung carcinoma and a metastatic brain tumor was diagnosed as having a work-related disease. He had been employed in a non-asbestos textile company for 25 years. Consequently, to identify and explore possible causative agents for lung cancer in a non-asbestos textile manufacturing company and establish a causal relationship between exposure and lung cancer, an epidemiological investigative study was conducted and the work processes the worker was engaged in were examined. Air samples were taken from the workplace and during the drilling processes, and a suspected causative material was analyzed. The study revealed that the subject had been employed in the non-asbestos textile manufacturing company for 25 years from 1973 and his responsibilities included repairing spinning machines. In particular, the subject was involved in drilling B-bushings that were used to protect against gear abrasion in the spinning machines. An analysis of the B-bushings using a transmission electron microscope equipped with an energy dispersive X-ray analyzer indicated that they contained crocidolite asbestos fibers. Air samples obtained when drilling the B-bushings clearly indicated that the subject had most likely been exposed to crocidolite fibers when installing the B-bushings in the spinning machines. The frequency and duration of the work suggested that there would be a sufficient degree of exposure to crocidolite fibers to cause lung cancer. Except for smoking and asbestos exposure, no other chemical exposure was suspected for developing lung cancer in the workplace. Smoking appeared to be more of a potentiating risk factor in conjunction with the asbestos exposure. Accordingly, this case may provide significant evidence in identifying the cause of the mesothelioma or lung carcinoma found among workers in non-asbestos textile manufacturing companies elsewhere.     

Formation of polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs) from a refinery process for zinc oxide used in feed additives: a source of dioxin contamination in Chilean pork

The Republic of Korea found dioxin at concentrations exceeding the Korean maximum residue limit (MRL) in pork (2 pg TEQ g⁻¹ fat) imported from Chile in June 2008. Korea and Chile collaborated and investigated to find out the sources of contamination. An isotope dilution method and high resolution gas chromatography/mass spectrometry (HR-GC/MS) were used for the analysis of PCDD/Fs. PCDD/Fs were found from 2.17 to 36.7 pg TEQ g⁻¹ fat from Chilean pork. 2,3,4,7,8-PeCDF, 1,2,3,4,7,8-HxCDF, 1,2,3,6,7,8-HxCDF, and 2,3,4,6,7,8-HxCDF were found as the major congeners in pork samples. 2,3,4,7,8-PeCDF showed the highest concentration and contributed about 30% among the congeners in most of the samples. 2,3,7,8-TCDD, 1,2,3,7,8,9-HxCDD, OCDD, 2,3,7,8-TCDF, 1,2,3,7,8-PeCDF, 1,2,3,7,8,9-HxCDF, and OCDF were not detected or exist at background levels in the less contaminated samples. Remarkably high concentrations of PCDD/Fs were found in samples of zinc oxide (17 147 pg TEQ g⁻¹), zinc oxide based premix (6673 pg TEQ g⁻¹), and the residue crust (800 pg TEQ g⁻¹) in a mixing chamber in the feed mill. From the results of various investigations, this case concluded that zinc oxide in the feed was the major source of the dioxin contamination in pork. The dioxins were formed from a metal refinery process to collect zinc oxide.